arnaia:

Jason Schwartzman in The Darjeeling Limited.

(via cussyeah-wesanderson)

(Source: bennycrispin, via gravitysex)

tendencies-of-indecision:

alantronics:

Making a Simple Tardis Bookcase ==========

~ $60 + 15 hours (lots of it in between waiting for paint/ wood glue to dry)

bill of material:

1. structural (use screws)
     2 pcs - 11.25” x 0.75” x 18” (sold as 11.5” by 1”, cut to 18” at HomeDepot)
     4 pcs - 11.25” x 0.75” x 36” (sold as 11.5” by 1”, cut to 36”)
     24+ pcs -  I used #6 x 1.25” (anything #6 - #10 and 1”+long would be fine)
     1 pcs - 19” x 36” (backboard; can be cut from big 4’ by 8’ of of thin plywood) 

2.  top decoration (use wood glue)
     2 pcs - 3.5” x 0.75” x 12” (sold as 3.75” by 1”, cut to 12”)
     1 pcs - 3.5” x 0.75” x 19.5” (sold as 3.75” by 1”, cut to 19.5”)
     1 pcs - 11.25” x 0.75” x 17.5” (sold as 11.5” by 1”, cut to 17.5”)

3. fine decoration  (use wood glue)
     6 pcs - 31.75” x 2” (cut from big plywood sheet)
     12 pcs - 2.625” x 2” (same plywood. * I used 11/32” thickness, but any works)
     4 pcs - 2.625” x 1” ( just break two of above into 4 pieces)

4. For the top tardis alarm light, I used a PVC pipe connected to a pipe cap

5. your choice of blue spray paint (white for window too) + wood glue

You can buy all these from HomeDepot, and get most of them cut for free there as well. Pictures are worth a thousand words, so I made some CAD drawing for anyone who wants to try this as a weekend project. Good Luck and Cheers!

………….Nani can we have one……………

Yes, yes we can. Lets build a TARDiS book case and a Dalek coffee table.

alantronics:

Making a Simple Tardis Bookcase ==========

~ $60 + 15 hours (lots of it in between waiting for paint/ wood glue to dry)

bill of material:

1. structural (use screws)
     2 pcs - 11.25” x 0.75” x 18” (sold as 11.5” by 1”, cut to 18” at HomeDepot)
     4 pcs - 11.25” x 0.75” x 36” (sold as 11.5” by 1”, cut to 36”)
     24+ pcs -  I used #6 x 1.25” (anything #6 - #10 and 1”+long would be fine)
     1 pcs - 19” x 36” (backboard; can be cut from big 4’ by 8’ of of thin plywood) 

2.  top decoration (use wood glue)
     2 pcs - 3.5” x 0.75” x 12” (sold as 3.75” by 1”, cut to 12”)
     1 pcs - 3.5” x 0.75” x 19.5” (sold as 3.75” by 1”, cut to 19.5”)
     1 pcs - 11.25” x 0.75” x 17.5” (sold as 11.5” by 1”, cut to 17.5”)

3. fine decoration  (use wood glue)
     6 pcs - 31.75” x 2” (cut from big plywood sheet)
     12 pcs - 2.625” x 2” (same plywood. * I used 11/32” thickness, but any works)
     4 pcs - 2.625” x 1” ( just break two of above into 4 pieces)

4. For the top tardis alarm light, I used a PVC pipe connected to a pipe cap

5. your choice of blue spray paint (white for window too) + wood glue

You can buy all these from HomeDepot, and get most of them cut for free there as well. Pictures are worth a thousand words, so I made some CAD drawing for anyone who wants to try this as a weekend project. Good Luck and Cheers!

(via stitchlessbitches)

(Source: echellon, via nufang)

(Source: m-arkle, via theforestdyke)

tom-suay:

Arizona Muse

thedapperlifestyle:

If you’re going to look like Satan, better look a dapper devil.

kqedscience:

Whole Foods Shows Customers the Bleak Future of Produce Without Bees

“The decline in bee populations has been all the buzz lately, which led Whole Foods Market to team up with the Xerces Society to show us what a world—or at least, produce section—without bees would look like. The University Heights, Rhode Island store removed all foods that are reliant upon the important pollinators, and it leaves a pretty slim selection; 52% of the produce department’s offerings would be pulled from shelves without bees around to help.”

(via inhabitat)

(via polyurethanesmile)

unimpressedcats:

don’t we all

(Source: sandandglass)

newfluffytown:

(via doctorwho)

“I don’t believe in men’s wear or women’s wear, I just like what I like.”

(Source: tropicaltrash, via wondermilkybeetch)